- Traditional Ceiling Mounted Sensors
- Completely flat ceiling sensors
- Ceiling sensors. Superior coverage at 1/8th the size
- Large area and high-bay sensors
(Light/Temp/Motion) - The easy way to integrate with BMS
- Wall mounted sensors. Perfect for stairwells and open ceiling applications
- Wall switch sensors
Programming and Hardware Accessories
- Advanced Control Platform
Search by 5-digit Product Code
MINI Ceiling-mount detectors
MINI-GH - High-bay sensors
MINI-IP65 - High-humidity sensors
MINI Ceiling-mount detectors >>
high-humidity sensors >>
MINI high bay secondary sensor for use with any PP power pack (requires primary sensor on same power pack)
Mini secondary motion sensor designed for high-bay applications
One MINI primary sensor is required on the same power pack for the MINI-S-PP-GH-W-FC to function. Refer to tech sheets for part numbers 97194, 97196, 97198 and the appropriate power pack.
Designed for wet and high-humidity locations
Works with the B.E.G. PP-1-J, PP-A-J or proprietary low voltage system
Up to 4 Secondary sensors may be connected with a primary sensor to increase motion detection coverage. 2-way male to female RJ-12 splitter included.
Spring clips for quick and easy installation in suspended ceilings and light fixtures
5 years limited warranty
Programmable features cannot be adjusted via the secondary sensors, only the primary sensor.
ROHS and REACH compliant
To maintain the wet location rating the back of the sensor must not be exposed to wet locations (must be installed in a covered ceiling, a fixture with a wet location rating, or in an IP65 or NEMA 4 enclosure).
The wet location rated version of MINI is not compatible with accessory trim rings, nor is the trim ring removable. Please contact B.E.G. Controls to order custom trim ring colors.
Warehouses Gymnasiums Multipurpose rooms School/University auditoriums and lecture halls Shopping mall atriums Open ceiling retail stores Hotel ballrooms and meeting rooms
Pole light applications Vacancy (Manual) operation is achieved by combining the MINI primary sensor, MINI-S-PP-GH-W-FC, and PP power pack with a low voltage momentary contact switch. For low mounting applications please refer to MINI-S-PP-W-FC, part number 97193.
Operating voltage: 24 V DC from B.E.G. Controls´ Power Pack PP-1-J or PP-A-J, or compatible power supply by others. Please contact B.E.G. Controls to confirm compatibility with power supplies by others.
Power consumption: 1 W
-13 °F to 122 °F / -25 °C to +50 °C
UV- and shock resistant 5VA material
Cable length: 9.8 ft / 300 cm
Compliances: ETL listed for the U.S. and Canada (UL STD 60730-1 and CSA STD E60730-1). UL 2043 plenum rated.
Specification Details [...]
Copyright: ® 2021-03-05 - B.E.G. Controls