Search by 5-digit Product Code
   


MINI Ceiling-mount detectors
MINI - Standard ceiling heights sensors

MINI-GH - High-bay sensors

  MINI-P-PP-A-GH-FC
  MINI-P-PP-DIM-GH-FC
  MINI-S-PP-GH-FC
   
 
MINI-IP65 - high-humidity sensors



image
   MINI-S-PP-GH-FC
  • MINI high bay secondary sensor for use with any PP power pack (requires primary sensor on same power pack)
  • Mini secondary motion sensor designed for high-bay applications
  • One MINI primary sensor is required on the same power pack for the MINI-S-PP-GH-FC to function. Refer to tech sheets for part numbers 97184, 97186, 97188 and the appropriate power pack.
  • Designed for wet and high-humidity locations
  • Works with the B.E.G. PP-1-J, PP-A-J or proprietary low voltage system
  • Up to 4 Secondary sensors may be connected with a primary sensor to increase motion detection coverage. 2-way male to female RJ-12 splitter included.
  • Spring clips for quick and easy installation in suspended ceilings and light fixtures
  • 5 years limited warranty
  • Programmable features cannot be adjusted via the secondary sensors, only the primary sensor.
  • ROHS and REACH compliant
  • Trim rings are removable for field painting. Use paints suitable for polyethylene plastic. Accessory rings are offered in several popular colors and in two different sizes. Please see accessory ordering information for options.
  • Indoor applications: Warehouses Gymnasiums Multipurpose rooms School/University auditoriums and lecture halls Shopping mall atriums Open ceiling retail stores Hotel ballrooms and meeting rooms
  • Vacancy (Manual) operation is achieved by combining the MINI primary sensor, MINI-S-PP-FC, and PP power pack with a low voltage momentary contact switch. For low mounting applications please refer to MINI-S-PP-FC, part number 97183. For outdoor and wet location applications please refer to MINI-S-PP-GH-W-FC, part number 97197.

 

   Type Part no.   
   MINI-S-PP-GH-FC 97187   
   Technical data
  • Operating voltage: 24 V DC from B.E.G. Controls´ Power Pack PP-1-J or PP-A-J, or compatible power supply by others. Please contact B.E.G. Controls to confirm compatibility with power supplies by others.
  • Power consumption: 1 W
  • Operating temperature:
    -13 °F to 122 °F / -25 °C to +50 °C
  • UV- and shock resistant 5VA material
  • Cable length: 9.8 ft / 300 cm
  • Compliances: ETL listed for the U.S. and Canada (UL STD 60730-1 and CSA STD E60730-1). UL 2043 plenum rated.

   Downloads MINI-S-PP-GH-FC
  Specification Details [...]
   Downloads



Copyright: ® 2019-12-06 - B.E.G. Controls (Imprint)
http://get.adobe.com/de/flashplayer/