Search by 5-digit Product Code
   


MINI Ceiling-mount detectors
high-humidity sensors
  MINI-P-PP-A-FC
  MINI-P-PP-DIM-FC
  MINI-S-PP-FC
MINI-GH - High-bay sensors
  MINI-P-PP-A-GH-FC
  MINI-P-PP-DIM-GH-FC
  MINI-S-PP-GH-FC
MINI-IP65 - High-humidity sensors
  MINI-P-PP-A-W-FC
  MINI-P-PP-DIM-W-FC
  MINI-S-PP-W-FC
  MINI-P-PP-A-GH-W-FC
  MINI-P-PP-DIM-GH-W-FC
  MINI-S-PP-GH-W-FC


image
   MINI-S-PP-FC
  • MINI secondary sensor for use with any PP power packs (requires primary sensor on same power pack)
  • One MINI primary sensor is required on the same power pack for the MINI-S-PP-FC to function. Refer to tech sheets for part numbers 97180, 97181, 97182 and the appropriate power pack.
  • Designed for indoor and dry locations
  • Works with the B.E.G. PP series power packs or proprietary low voltage system
  • Up to 4 Secondary sensors may be connected with a primary sensor to increase motion detection coverage. 2-way male to female RJ-12 splitter included.
  • Spring clips for quick and easy installation in suspended ceilings and light fixtures
  • 5 years limited warranty
  • Masking blinds included
  • Programmable features cannot be adjusted via the secondary sensors, only the primary sensor.
  • ROHS and REACH compliant
  • Trim rings are removable for field painting. Use paints suitable for polyethylene plastic. Accessory rings are offered in several popular colors and in two different sizes. Please see accessory ordering information for options.
  • Indoor applications: Private and Open Offices Conference Rooms School/University Classrooms Corridors Healthcare and Laboratory Spaces
  • Vacancy (Manual) operation is achieved by combining the MINI primary sensor, MINI-S-PP-FC, and PP power pack with a low voltage momentary contact switch. For high mounting applications please refer to MINI-S-PP-GH-FC, part number 97187. For outdoor and wet location applications please refer to MINI-S-PP-W-FC, part number 97193.

 

   Type Part no.   
   MINI-S-PP-FC 97183   
   Technical data
  • Operating voltage: 24 V DC from B.E.G. Controls Power Pack PP-1-J or PP-A-J, or compatible power supply by others. Please contact B.E.G. Controls to confirm compatibility with power supplies by others.
  • Power consumption: 1 W
  • Operating temperature:
    -13 °F to 122 °F / -25 °C to +50 °C
  • UV- and shock resistant 5VA material
  • Cable length: 9.8 ft / 300 cm
  • Compliances: ETL listed for the U.S. and Canada (UL STD 60730-1 and CSA STD E60730-1). UL 2043 plenum rated.

   Downloads MINI-S-PP-FC
  Specification Details [...]
   Downloads



Copyright: ® 2024-03-28 - B.E.G. Controls (Imprint)
http://get.adobe.com/de/flashplayer/