Home
The Unsystem
Products
Power Packs
CIRCLE
- Traditional Ceiling Mounted Sensors
FLAT
- Completely flat ceiling sensors
MINI
- Ceiling sensors. Superior coverage at 1/8th the size
CONNECT
- Large area and high-bay sensors
LTMS
(Light/Temp/Motion) - The easy way to integrate with BMS
GOLF
- Wall mounted sensors. Perfect for stairwells and open ceiling applications
WAVE
- Wall switch sensors
Wall stations
Programming and Hardware Accessories
RATIO
- Advanced Control Platform
Company
Company profile
Downloads
Technical Support
Design Assistance
Downloads
Contact
Company address
Inquiry form
OEM
Sales Agents
Search by 5-digit Product Code
MINI Ceiling-mount detectors
high-humidity sensors
MINI-P-PP-A-FC
MINI-P-PP-DIM-FC
MINI-S-PP-FC
MINI-GH - High-bay sensors
MINI-P-PP-A-GH-FC
MINI-P-PP-DIM-GH-FC
MINI-S-PP-GH-FC
MINI-IP65 - High-humidity sensors
MINI-P-PP-A-W-FC
MINI-P-PP-DIM-W-FC
MINI-S-PP-W-FC
MINI-P-PP-A-GH-W-FC
MINI-P-PP-DIM-GH-W-FC
MINI-S-PP-GH-W-FC
Products >>
MINI Ceiling-mount detectors >>
MINI-OEM >>
MINI-S-PP-GH-W-FC
MINI-S-PP-GH-W-FC
MINI high bay secondary sensor for use with any PP power pack (requires primary sensor on same power pack)
Mini secondary motion sensor designed for high-bay applications
One MINI primary sensor is required on the same power pack for the MINI-S-PP-GH-W-FC to function. Refer to tech sheets for part numbers 97194, 97196, 97198 and the appropriate power pack.
Designed for wet and high-humidity locations
Works with the B.E.G. PP-1-J, PP-A-J or proprietary low voltage system
Up to 4 Secondary sensors may be connected with a primary sensor to increase motion detection coverage. 2-way male to female RJ-12 splitter included.
Spring clips for quick and easy installation in suspended ceilings and light fixtures
5 years limited warranty
Programmable features cannot be adjusted via the secondary sensors, only the primary sensor.
ROHS and REACH compliant
To maintain the wet location rating the back of the sensor must not be exposed to wet locations (must be installed in a covered ceiling, a fixture with a wet location rating, or in an IP65 or NEMA 4 enclosure).
The wet location rated version of MINI is not compatible with accessory trim rings, nor is the trim ring removable. Please contact B.E.G. Controls to order custom trim ring colors.
Indoor applications:
Warehouses Gymnasiums Multipurpose rooms School/University auditoriums and lecture halls Shopping mall atriums Open ceiling retail stores Hotel ballrooms and meeting rooms
Outdoor application:
Pole light applications Vacancy (Manual) operation is achieved by combining the MINI primary sensor, MINI-S-PP-GH-W-FC, and PP power pack with a low voltage momentary contact switch. For low mounting applications please refer to MINI-S-PP-W-FC, part number 97193.
Type
Part no.
MINI-S-PP-GH-W-FC
97197
Technical data
Operating voltage: 24 V DC from B.E.G. Controls´ Power Pack PP-1-J or PP-A-J, or compatible power supply by others. Please contact B.E.G. Controls to confirm compatibility with power supplies by others.
Power consumption: 1 W
Operating temperature:
-13 °F to 122 °F / -25 °C to +50 °C
UV- and shock resistant 5VA material
Cable length: 9.8 ft / 300 cm
Compliances: ETL listed for the U.S. and Canada (UL STD 60730-1 and CSA STD E60730-1). UL 2043 plenum rated.
Downloads MINI-S-PP-GH-W-FC
Specification Details [...]
Downloads
Manual
(179kb)
Datasheet
(1448kb)
Copyright: ® 2024-12-12 - B.E.G. Controls
(Imprint)
http://get.adobe.com/de/flashplayer/