B.E.G. Brï¿½ck Electronic GmbH

PP-A

PP-1

Full-featured power pack that provides power to B.E.G. low voltage motion/daylight sensors and switching/dimming control
Compatible with sensor part numbers 97181, 97183, 97187, 97188, 97191, 97193, 97197, 97198, 97033, and 97041
Suitable for parallel connection of one mandatory primary and maximum four optional secondary sensors to increase detection coverage.
Operating modes include motion detection/daylight harvesting, daylight harvesting only, or motion detection only
Actions upon motion detection: Automatic On, Partial-On at dim level, Manual On
Actions upon vacancy: Automatic-Off, Partial-Off at dim level, Timed Partial-Off at dim level then Automatic-Off
Integrated manual (vacancy)/automatic (occupancy) mode switch
LED status and fault indicators
½ inch trade size threaded nipple with two lock nuts included.
All programmable features can be adjusted using our free Android and iOS apps (requires IR-ADAPTER, part number 92726 sold separately).
Switch input to manually toggle and dim lighting load override sensor (normally-open momentary dry contact)
RJ-12 sensor connection port.
Integral short circuit and thermal protection
5 years limited warranty
ROHS and REACH compliant

Power pack PP-DIM-J

97017

Operating voltage: 120 - 277 V AC 50 / 60 Hz
Power output: 24 V D C/ 180 mA (Class II)
Control input: 24 V DC/4 mA
1 Input signal for device (Motion) mA
Operating temperature: -4 °F to 122 °F / -20 °C to +50 °C
Housing: UV- and shock resistant 5VA material
Compliances: ETL listed for the U.S. and Canada (UL STD 244A and CSA STD C22.2#14). UL 2043 plenum rated.
DIM output: 0 - 10 V DC, max. 50 ECG / 100 mA