B.E.G. Brï¿½ck Electronic GmbH

RATIO push button controller with Bluetooth interface
Requires RATIO control devices. Minimum required controls are 1 sensor, 1 Bluetooth-enabled push button module (PBM), and 1 power supply
Requires DALI 2.0 or 1.0 certified control gear devices (i.e. LED drivers, fluorescent ballasts) For compatibility with other control methods and integration (i.e. 0-10 V analog, PWM, ELV, contact closure), please contact B.E.G. Controls for a solution and the required bill of material.
Normally-open momentary dry contact closure buttons with a single common required for PBM inputs. Maximum of 4 buttons plus common per PBM.
Designed for indoor and dry locations
Mounts inside any standard wall switch box
A second QR code label included for easy access during commissioning
Choose from a wide range of selectable functions for the 4 independently configurable push buttons
Audible “Beep” feedback to locate device during pairing and commissioning
Green LED to indicate functional "On" status
Set-up and programming is accomplished using our free RATIO Android or iOS app. Requires a Bluetooth-enabled phone or tablet by others. Contact B.E.G. Controls for list of compatible devices
ROHS and REACH compliant
5 years limited warranty
Indoor applications:
Conference Rooms
Private Offices
Media Rooms
Lecture Halls
Hotel Ballrooms and Meeting Rooms

PBM-DALILINK-4W-BLE

92732

Operating voltage: 16 V DC from B.E.G. Controls RATIO power supply Class 2 Low Voltage
RATIO Bus Power consumption: 7 mA
Dimensions: 1.5 x 1.5 x 0.6 in / 38 x 38 x 14 mm
Suitable Environment: -13 °F to 122 °F / -25 °C to +50 °C Non-condensing
Housing: UV- and shock resistant/flame retardant polycarbonate
Connections and wires: Wire leads, 22 AWG
Maximum wire length (Between push button and PBM): 19.7 in / 50 cm