Momentary contact wall switches
Search by 5-digit Product Code
RATIO Control Solutions
RATIO Master controller with daylight and PIR motion sensing
Requires RATIO control devices. Minimum required controls are 1 sensor, 1 Bluetooth-enabled push button module (PBM), and 1 power supply
Requires DALI 2.0 or 1.0 certified control gear devices (i.e. LED drivers, fluorescent ballasts) For compatibility with other control methods and integration (i.e. 0-10 V analog, PWM, ELV, contact closure), please contact B.E.G. Controls for a solution and the required bill of material.
Designed for indoor and dry locations
Aesthetic virtually flat ceiling profile
Visible dimensions from below ceiling: 0.03 inch / H 0.85 mm
Photosensor included as a standard fea
Spring clips for quick and easy installation in suspended ceilings and light fixtures
Masking blinds and mounting collar included
Set-up and programming is accomplished using our free RATIO Android or iOS app. Requires a Bluetooth-enabled phone or tablet by others. Contact B.E.G. Controls for list of compatible devices.
ROHS and REACH compliant
5 years limited warranty
Accessory snap-on trim rings are offered in standard or custom colors, or for field painting.
Hotel Ballrooms and Meeting Rooms
Operating voltage: 16 V DC from B.E.G. Controls RATIO power supply Class 2 Low Voltage
RATIO Bus Power consumption: 2 mA
Recommended height for mounting min.: 7 ft / 2.0 m
Recommended height for mounting max.: 16 ft / 5.0 m
-13 °F to 122 °F /
-25 °C to +50 °C, Non-Condensing
Housing: UV- and shock resistant/flame retardant polycarbonate
Connections and wires: 16 - 14 AWG, solid copper recommended
Compliances: UL 2043 plenum rated.
Follow-up time: 1 sec - 30 min
Partial Off: 5 - 100 % / 1 min - 20 min / ∞
Brightness set value: 1 – 250 fc / 10 - 2500 Lux
Specification Details [...]
Overview RATIO Architectural Scene Room Control
Copyright: ® 2019-02-21 - B.E.G. Controls