B.E.G. Brï¿½ck Electronic GmbH

DALI bus power supply for use with RATIO architectural scene control components and DALI 2.0 or 1.0 compatible control gear devices (i.e. LED drivers, fluorescent ballasts)
Requires RATIO controls and DALI compatible devices. Supports up to 100 mA bus power.
A second PP-DALI-PS can be wired in parallel to provide an additional 100 mA bus power (for 200 mA total). Do not connect more than two PP-DALI-PS, or a PP-DALI-PS with a different DALI bus power supply, to a single DALI bus. This could result in permanent damage to the connected RATIO and DALI devices.
Mounts on a standard junction box through a ½ inch trade size knockout. Two lock nuts included.
Plenum rated
Status and fault LED for easy troubleshooting
Integral short circuit and thermal protection
5 years limited warranty
ROHS and REACH compliant
Indoor applications:
Conference Rooms
Private Offices
Media Rooms
Lecture Halls
Hotel Ballrooms and Meeting Rooms

PP-DALI-PS

97228

Power Supply: 120-277 VAC ± 10%, 60 Hz
Power consumption: 3.3 W
DALI Output voltage: typ. 16 V DC (UL Class II Low Voltage)
Maximum supply current: 100 mA
Operating temperature: -13 °F to 122 °F/ -25 °C to +50 °C
Housing: UV- and shock resistant 5VA material
Protection: Suitable for indoor use and dry locations only, Non-Condensing
Pollution degree: 2
Control Action: Type 1
Dimensions:
3.35 x 3.27 x 1.5 inch /
86 x 83 x 38mm
Compliances: ETL listed for the U.S. and Canada (UL STD 60730-1 and CSA STD E60730-1). UL 2043 plenum rated.