Search by 5-digit Product Code
   


MINI Ceiling-mount detectors
high-humidity sensors
  MINI-P-PP-A-FC
  MINI-P-PP-DIM-FC
  MINI-S-PP-FC
MINI-GH - High-bay sensors
  MINI-P-PP-A-GH-FC
  MINI-P-PP-DIM-GH-FC
  MINI-S-PP-GH-FC
MINI-IP65 - High-humidity sensors
  MINI-P-PP-A-W-FC
  MINI-P-PP-DIM-W-FC
  MINI-S-PP-W-FC
  MINI-P-PP-A-GH-W-FC
  MINI-P-PP-DIM-GH-W-FC
  MINI-S-PP-GH-W-FC


image
   MINI-S-PP-GH-W-FC
  • MINI high bay secondary sensor for use with any PP power pack (requires primary sensor on same power pack)
  • Mini secondary motion sensor designed for high-bay applications
  • One MINI primary sensor is required on the same power pack for the MINI-S-PP-GH-W-FC to function. Refer to tech sheets for part numbers 97194, 97196, 97198 and the appropriate power pack.
  • Designed for wet and high-humidity locations
  • Works with the B.E.G. PP-1-J, PP-A-J or proprietary low voltage system
  • Up to 4 Secondary sensors may be connected with a primary sensor to increase motion detection coverage. 2-way male to female RJ-12 splitter included.
  • Spring clips for quick and easy installation in suspended ceilings and light fixtures
  • 5 years limited warranty
  • Programmable features cannot be adjusted via the secondary sensors, only the primary sensor.
  • ROHS and REACH compliant
  • To maintain the wet location rating the back of the sensor must not be exposed to wet locations (must be installed in a covered ceiling, a fixture with a wet location rating, or in an IP65 or NEMA 4 enclosure).
  • The wet location rated version of MINI is not compatible with accessory trim rings, nor is the trim ring removable. Please contact B.E.G. Controls to order custom trim ring colors.
  • Indoor applications: Warehouses Gymnasiums Multipurpose rooms School/University auditoriums and lecture halls Shopping mall atriums Open ceiling retail stores Hotel ballrooms and meeting rooms
  • Outdoor application: Pole light applications Vacancy (Manual) operation is achieved by combining the MINI primary sensor, MINI-S-PP-GH-W-FC, and PP power pack with a low voltage momentary contact switch. For low mounting applications please refer to MINI-S-PP-W-FC, part number 97193.

 

   Type Part no.   
   MINI-S-PP-GH-W-FC 97197   
   Technical data
  • Operating voltage: 24 V DC from B.E.G. Controls´ Power Pack PP-1-J or PP-A-J, or compatible power supply by others. Please contact B.E.G. Controls to confirm compatibility with power supplies by others.
  • Power consumption: 1 W
  • Operating temperature:
    -13 °F to 122 °F / -25 °C to +50 °C
  • UV- and shock resistant 5VA material
  • Cable length: 9.8 ft / 300 cm
  • Compliances: ETL listed for the U.S. and Canada (UL STD 60730-1 and CSA STD E60730-1). UL 2043 plenum rated.

   Downloads MINI-S-PP-GH-W-FC
  Specification Details [...]
   Downloads



Copyright: ® 2024-12-12 - B.E.G. Controls (Imprint)
http://get.adobe.com/de/flashplayer/